Commercial 
Contractor 
Government 
Educational 
Airport Are you in the market for a hot-tack kettle asphalt sprayer for small to medium asphalt patching or overlay jobs? The Sealmate SM-200HT is a 200-gallon skid mounted sprayer that is a turn-key piece of equipment for hot tack spraying needs.
Heating the Sealmate 200HT is a torch-style propane burner with an included 45lb refillable propane bottle and temperature gauge for monitoring the heat. The heating system is a "U" shape fire tube burner style that is designed to provide heat to the entire bottom of the tank. This style of burner is safer on materials that are prone to overheating problems.
Powered by the DuroMax XP7HPE which is a 7.0HP electric start gas engine, makes spraying easy with the included 50' hose and spray-wand, and the built-in solvent/waste tank makes this a great all-around hot tack sprayer.
This is a professionally built system that is designed for budget-minded contractors or small asphalt install and repair crews. It doesn't come with many whistles and bells, but it's designed to last and work strong.
Note: Hot tack systems like this are NOT used for sealcoating applications. Professional tack coats must be heated to a specific temperature before installing new asphalt or repairing asphalt.
The dimensions of the 200 Gallon hot tack kettle are 70" L x 43" W which will fit a variety of pickup beds. The question has come up, "will it fit?" The answer is yes, in many cases.
What you need to consider though, is the weight. Empty this unit weighs 1,040 lbs. If the average weight of the hot tack is around 8.3 lbs per gallon, that's 1,660 lbs of material plus 1,040 lbs for the unit bringing it in to around 2,700 lbs total.
You will need a truck with a cargo capacity of around 1.5 tons. Check your trucks cargo capacity and worst case, you can always buy a flatbed trailer for a lot less money than buying a truck just to handle the weight.
The only other thing to think about is a full tank becomes very top heavy and might cause a the truck to tip over in hard corners. Be safe.
This product comes with a 1 year (12 month) limited warranty from the time of purchase.
Parts that are not explicitly made by this manufacturer, may come with a different warranty period or policy. See this products respective operations manual for a detailed version of the warranty policy and a full list of items that are covered or may become void due to improper maintenance.
200 gallon heated tank
50 foot hose and wand
Temperature gauge
45lb refillable propane bottle
Solvent and waste tanks
Gas engine
Tiedowns and lifting points
Manufacturer | DuroMax Power Equipment |
Part # | XP7HPE |
Engine Type | 4-Stroke |
Valve Type | OHV |
Engine Cooling Type | Forced Air |
Displacement | 208cc |
Bore | 70mm |
Stroke | 55mm |
Max Output | 3600 RPM |
Max Torque | 13.2 Nm / 9.7 ft/lb. |
Compression Ratio | 8.5:1 |
Shaft Orientation | Horizontal |
Shaft Size | 3/4" Diameter, 2-3/8" Long, 3/16" x 1.79" Keyway |
Shaft End | 5/16" Size 24 UNF - Drilled and Tapped |
Shaft Rotation | Counter Clockwise |
Measurement from Center of Shaft to Base | 4.175" |
Fuel Tank Capacity | 1 Gallons |
Fuel Types | 87+ Octane Gasoline |
Fuel Delivery System | Carburetor |
Average Run Time | 1/4 Gallon Per Hour (at 1/2 load) |
Starting Type | Key Switch |
Electric Start | Yes |
Recoil Start | Yes |
Cast Iron Sleeve | Yes |
Bearing Type | Stainless Steel Ball Bearing |
Oil Cooling Type | Splash |
Oil Capacity | 20.3 fluid oz. |
Recommended Oil | 10W-30 |
Recommended Oil Types | Blended, Conventional, or Synthetic |
Product Dimensions | 16.3"-Long x 13"-Wide x 13.4"-High |
Product Weight | 38-lbs |
UPC | 811640011208 |
Warranty | 3 Year |
EPA Certified | Yes |
CARB Certified | Yes |
50 State Emissions | Yes |
What's in the Box? | DuroMax XP7HPE Engine, 12V Battery Leads, and Owner's Manual |
Dimensions | 70” L x 43" W |
Empty Weight | 1,040 Lbs |
