Description

PreMark® Preformed Thermoplastic products made by Ennis-Flint are top pick products within the thermomarking industry and do NOT require any pre-heating prior to installation. Simply place, heat and go.

PreMark is a heavy-duty preformed thermoplastic that is a very durable "intersection grade" pavement marking material. There are no minimum requirements on the ambient or road temperature requirements which allows pavement marking season to extend into the colder months.

The top surface of the material has regularly spaced heating indicators which provide a visual cue during application that the material has reached a molten state. This tells you when proper adhesion and bead embedment has been achieved. The heating indicators also provide a post-application visual cue that you installed it correctly and ready to move on.

Get a FHWA / ADA Handicap stencil (40" x 40") or an oversized non-standard (48" x 48") that works on both asphalt or concrete*

Shipped as a precut, ready-to-use package of 1 at 90 mils thickness with ViziGrip® per handicap template.

If you aren't familiar with ViziGrip, it's a product offered by Ennis-Flint for their preformed thermoplastic marking line. It includes glass beads along with a special aggregate to create an anti-skid marking. This PreMark handicap stencil comes standard with ViziGrip so you don't need to order it separately.

*Concrete requires pre-sealer before applying thermoplastic.

Premark Full Product List

Looking for a preformed marking we don't have listed? Check out a PDF of the full product list that can be purchased over the phone +1(800) 689-2098 View Full product List

Do You Need Sealer?

Preformed Thermoplastic, while a great product, is still susceptible to contaminants and moisture that can prevent the preformed marking from sticking properly to the pavement. There are times when a sealer is required and times when sealer is recommended. Let's cover the different scenarios so you can be confident in whether you need a sealer for your next project.

Pavement Type
Concrete: If you're applying a preformed marking to concrete, you must use sealer no matter what kind of marking you are using. Concrete traps moisture and contaminants like salt, that will seep to the surface and could eventually cause the marking to pop loose. If you're applying a preformed marking to concrete, always use a sealer.

Asphalt: Asphalt can go either way. If the asphalt is new and the top layer still contains the asphalt oils, then you don't need a sealer but if you want to throw caution to the wind, it won't hurt anything if you do. However, if the asphalt is old and oxidized, then you do need a sealer. If you're installing a multi-color marking on asphalt, it is highly recommended that you use a sealer, regardless of the asphalt age.

Product Links

2-Part Sealer Kit View Product

2-Part Sealer Gun View Product

Product SKU List

These are the SKU numbers to give if you plan to buy over the phone. To see pricing changes (if any), click on the "drop down" arrow in the Add to Cart section above.


Size	ViziGrip Part Number	Anti-Skid Part Number
40" x 40"	89230237HS	PMSK89230237
48" x 48"	89230230HS	PMSK89230230

Specifications

General


Installed Dimensions	40" x 40" or 48" x 48"
Case Quantity	1
Glass Beaded	Yes
Thickness	90 mils
Color Designation	White on Blue

Federal Requirements


Material Standards	Conforms to AASHTO designation M249
Glass Bead Standards	Conforms to AASHTO designation M247
White & Yellow Color Standards	Meets FHWA Docket No. FHWA-99-6190 Table 5 and Table 6
Retroreflectivity Standards	In accordance to ASTM E 1710